Vehicle Window Signage Designer

Our designer works best on a bigger screen. Open this page on a desktop or laptop to start designing your vehicle signage.

Email This Link to Myself or We'll Design It For You
← Back to Store
Vehicle Window Signage Designer Upload a photo, calibrate to size, design at real-world scale — full-colour print & contour cut

Elements

1 Click the first point of something with a known measurement.
⚠ Curvature consideration: your design is wider than 600mm. On strongly curved rear windows, large stickers can bow at the edges during installation.

How would you like to start?

Either upload a photo of your vehicle to design at real-world scale on the actual window, or skip straight to designing if you already know the size you need.

Recommended

Upload Vehicle Window Photo

See exactly how your signage will look on your vehicle. Calibrate to real-world size by clicking two reference points.

Design Without Photo

Already know the size you need? Enter the dimensions and start designing straight away — no photo required.

Need help? We'll design it for you →

Upload Artwork

Drop file here or click to upload

SVG · PNG · JPG

Layers

No elements yet
How your sticker is cut

The cut follows the outer edge of your artwork, with a 10mm clear border around it. The magenta line on the canvas shows exactly where it will be cut — the space between your artwork and the border prints clean white.

Your Design Size

This is the finished size of your design, measured from the outer edges of your artwork. Use this size to price your sticker on the product page.

0 × 0 mm

Heads up — JPG image

JPG images can't have a see-through background, so this image will be cut as a rectangle — the cut line won't follow the shape of the picture.

If you want the sticker cut to a shape, upload a PNG with a transparent background or an SVG instead. You can carry on with the JPG if a rectangle is fine.

Image quality check

One or more images may not print sharply at the size you've used them:

    About window curvature

    Vehicle rear windows aren't always flat. Some are quite curved — sports cars, hatchbacks, and many SUVs in particular.

    How this affects your sticker:

    • A flat sticker applied to a curved window will sit fine in the middle but may bow at the edges if it's very wide.
    • Smaller stickers (under 600mm wide) usually conform without issue.
    • Larger stickers on strongly-curved windows may need to be split into multiple pieces.

    What to do:

    • If your rear window is flat or only gently curved → no special action needed.
    • If it's strongly curved and you want a wide design → consider splitting it, or contact us before ordering and we'll advise.

    Not sure how curved your window is? Place a straight edge across the widest part. If there's a noticeable gap at the edges, the window is curved.